Tag: Santa Barbara target

Eloro Resources Intersects Multiple Intersections including 122.25g Ag eq/t (17.77g Ag/t, 0.30% Zn, 0.33% Pb, 0.10% Cu and 0.16% Sn) over 210.74m in High Grade Feeder Zone, Santa Barbara Target Area at the Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

The headline intersection in hole METSBUG-03 drilled from the Santa Barbara adit, includes higher-grade portions of: 272.90g Ag eq/t (100.21g Ag/t, 0.37% Pb, 0.17% Cu and 0.34% Sn) over 16.57m. 199.68g Ag eq/t (51.11g Ag/t and 0.34% Sn) over 13.11m. 64% of this 707.8m long drill hole contains reportable intersections averaging 164.32 g Ag eq/t. Holes DSB-38, DSB-39 and DSB-40 tested the on-strike extension of the High Grade Feeder Zone at Santa Barbara to the south-southeast. These holes tested an approximately 1,000m (1km) long section in mineralized dacite across the central part of the caldera valley approximately 500m south-southeast of the underground drill bay in the Santa Barbara adit. Highlights include: 269.56g Ag eq/t (52.63g Ag/t, 3.02% Zn and 1.82% Pb) over 58.85m including 462.04g Ag eq/t (75.05g Ag/t, 5.87% Zn and 2.55% Pb over 23.80m (DSB-38). 101.74g Ag eq/t (10.59g Ag/t, 0.16 g Au/t, 1.23% Zn and 0.28% Pb) over 74.07m including 255.53g Ag eq/t (31.83g Ag/t, 0.59 g Au/t, 2.73% Zn and 0.64% Pb over 17.24m (DSB-38). 91.96g Ag eq/t (4.71g Ag/t, 1.37% Zn and 0.15% Pb) over 193.96m with higher-grade portions of 147.94g Ag eq/t (4.56g Ag/t, 2.48% Zn and 0.29% Pb) over 19.86m and 218.05g Ag eq/t (14.33g Ag/t, 0.14 g Au/t, 3.35% Zn and 0.33% Pb) over 11.21m (DSB-40). 34% of these three holes which total 2,761m contained reportable intersections which collectively averaged 106 g Ag eq/t. Hole DSB-41, collared on a section 300m northwest of the DSB-38 to -40 section, intersected altered and mineralized dacite including 145.52g Ag eq/t (15.52g Ag/t, 0.11gAu/t, 1.54% Zn, 0.36% Pb and 0.07% Sn) over 71.39m, including a higher-grade portion of 261.83g Ag eq/t (26.12g Ag/t, 0.09g Au/t, 2.78% Zn, 0.56% Pb and 0.17% Sn over 15.24m. Hole DSB-35 that tested the potential southwest extension of the Santa Barbara High Grade Feeder Zone approximately 300m west-northwest of the underground drill bay in the Santa Barbara adit intersected 89.43g Ag eq/t (5.63g Ag/t, and 0.20% Sn) over 104.86m with higher-grade portions of 203.86g Ag eq/t (5.42g Ag/t, 0.14 gAu/t, and 0.47% Sn) over 8.69m, 383.23 g Ag eq/t (5.66g Ag/t, 0.06 g Au/t, and 0.95% Sn) over 4.44m and 153.09g Ag eq/t (2.40g Ag/t and 0.37% Sn) over 7.66m. Sn grades are notably elevated in this area. On-Strike Extension of the High-Grade Feeder Zone at Santa Barbara to South-Southeast is now confirmed for an additional 500m along strike for a total strike length of 1,500m. Geophysical data indicates potential for a further 500m strike length to 2,000m. Width of the Santa Barbara mineralized zone is now up to 1,000m across strike with a depth of at least 800m. The mineralized zone remains open in ALL directions as well as at depth.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,
Geological Plan Map showing Drilling in Santa Barbara Area with Holes referred to in this release highlighted.

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from eight (8) additional diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Six of these holes (DSB-35 and DSB-37 to DSB-41) tested the south-southeastern extension of the high-grade feeder zone at Santa Barbara while METSBUG-03 is a metallurgical hole drilled from the Santa Barbara adit underground drill bay. Hole DM2-01 is a reconnaissance drill hole near the Mina 2 adit in the southeast part of the property. read more

Eloro Resources’ Deep Underground Hole DSBU-10 Intersects 188.64 g Ag eq/t (44.75 g Ag/t, 0.08 g Au/t, 1.05% Zn, 0.76% Pb and 0.14% Sn) over 349.08m in Core of Feeder Zone in the Santa Barbara Target Area at the Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Hole DSBU-10 drilled at azimuth 400 and a dip of -600, is the highest grade, longest intersection thus far at Iska Iska and includes the highest grade Ag to date of 44.75 g Ag/t over 349.08m. Notably, 59% of the overall length of this 878.9m long hole yielded reportable intersections which collectively average 160.14 g Ag eq/t. Hole DHK-24, collared at surface near Huayra Kasa approximately 100m SE of Hole DSBU-10 and drilled to the SW at -600 intersected multiple intersections including 114.62 g Ag/t (17.89 g Ag/t, 0.04 g Au/t, 1.58% Zn, 0.62% Pb and 0.05% Sn) over 112.91m, 84.31 g Ag eq/t (2.61 g Ag/t, 0.10 g Au/t, 1.22% Zn and 0.21% Pb) over 162.48m, 120.0 g Ag eq/t (5.51 g Ag/t, 0.09 g Au/t, 1.71 %Zn and 0.34%Pb) over 65.73m and 110.91 g Ag eq/t (43.67 g Ag/t, 0.07 g Au/t, 0.35% Zn, and 0.10 % Sn) over 177.86m. Notably, 62% of the overall length of this 926.3m long hole yielded reportable intersections which collectively average 110.70 g Ag eq/t. The major feeder zone at Santa Barbara remains open to the southeast where further drilling is now in progress. Note that metal prices for the Ag equivalent calculation have been updated to reflect current metal prices.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from two (2) additional diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Hole DSBU-10 is an underground hole drilled at azimuth 400 at -600 dip across the higher-grade feeder zone. Hole DHK-24 is a surface drill hole collared near Huayra Kasa approximately 100m SE of Hole DSBU-10 and drilled to the SW at -600. Four drills including three surface drills and one underground drill are focussed on completing drilling in the Santa Barbara Resource Definition Drilling Area. A fourth surface drill has been added to further expand drilling capacity. read more

Eloro Resources Intersects 160.00 g Ag eq/t (27.37g Ag/t, 0.62% Zn, 0.52% Pb and 0.11% Sn) over 251.87m and 133.45 g Ag eq/t (19.10g Ag/t, 0.20 g Au/t, 0.42% Zn, 0.64% Pb and 0.08% Sn) over 289.45m in the Santa Barbara Target area at the Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

These new drill results combined with previously released drill results for the underground drilling are defining a potential major feeder structure for the Ag-Sn polymetallic mineralization in the Santa Barbara Adit area. Bore Hole Induced Polarization (BHIP) surveys to a depth of almost 1,000m indicates that the conductivity increases with depth indicating that this potential feeder zone could be substantive.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from an additional four (4) diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Holes DSBU-08, DSBU-07 and DSBU-04 are underground holes drilled from the Santa Barbara adit to test the southwestern and southern extension of the higher-grade mineralized zone. Surface drill hole DSB-26 tested the northwest extension of the Santa Barbara mineralized zone approximately 800m northwest of the Santa Barbara adit underground drill bay. Drilling is currently focussed primarily on the Santa Barbara Resource Definition Drilling Area with two surface drills and one underground drill. One surface drill is completing holes in the Porco area to test for a potential tin porphyry as suggested by the 3D inverse magnetic model (see Eloro press release dated March 1, 2022). read more

Eloro Resources Intersects 169.11 g Ag eq/t (64.30 g Ag/t, 0.96% Zn, 0.37% Pb and 0.07% Sn) over 235.55m to further Expand Higher Grade area to the North in the Eastern Part of the Santa Barbara Target at the Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Includes a higher-grade section in this underground hole DSBU-06 (Azimuth 00 and dip -650) of 314.52 g Ag eq/t (192.18g Ag/t, 0.22 g Au/t, 0.07% Zn, 0.41% Pb, and 0.11% Sn) over 50.68m and an additional intersection of 110.57 g Ag eq/t (17.38 g Ag/t, 0.09 g Au/t, 0.30% Zn, 0.21% Pb and 0.11%Sn) over 128.44m further down the hole. Overall, for DSBU-06, 86% of this 599.8m long hole had reportable intersections, which collectively average 129.70 g Ag eq/t. Underground hole DSBU-05 on the same due north section as DSBU-06, but shallower at -400, intersected 141.05 g Ag eq/t (22.99g Ag/t, 0.07g Au/t, 0.18% Zn, 0.16% Pb, 0.21% Cu and 0.12% Sn) over 153.25m. Hole DSBU-05 has a second major intersection lower in the hole from 348.08m to 526.17m of 92.47 g Ag eq/t (23.86g Ag/t, 0.96% Zn, 0.21% Pb) over 178.09m. Overall, 65% of this 641.9m long hole had reportable intersections which collectively average 107.73 g Ag eq/t.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,
Figure 1

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from an additional six (6) diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Holes DSBU-05 and DSBU-06 are underground holes drilled from the Santa Barbara adit to test the northern extension of the higher-grade mineralized zone. Hole DSBS-01 was collared in the southern part of the Santa Barbara target zone and drilled at an azimuth of 300 and dip of -300 to test the same target. Holes DSB-24, DSB-14 and DSB-22 were drilled at azimuths of 2250 to test the northwest extension of the Santa Barbara mineralized zone approximately 100m, 200m, and 1,000m, respectively, northwest of the Santa Barbara adit underground drill bay. Drilling is continuing in the Porco area to test for a potential Sn porphyry as suggested by the 3D inverse magnetic model (see Eloro press release March 1, 2022). Thus far, 4,870 m in five (5) holes have been completed in the Porco target area with assays pending. read more

Eloro Resources Intersects 172.43 g Ag eq/t (40.16 g Ag/t, 0.51% Zn, 0.41% Pb and 0.13% Sn) over 303.05m in Southern Part of Santa Barbara Target at Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Includes higher-grade sections of 507.64 g Ag eq/t (119.36 g Ag/t, 0.14 g Au/t, 0.57 %Pb and 0.52 %Sn) over 49.55m from 0.0 to 49.55m and 196.67 g Ag eq/t (66.93 g Ag/t, 1.03% Zn, 0.67% Pb and 0.08% Sn) over 77.77m in underground drill hole METSBUG-02. Hole DSB-20, which is in approximately the centre of the NW Extension target area, intersected 22 reportable intersections with a best result of 129.42 g Ag eq/t (21.79 g Ag/t, 0.27% Zn, 0.36% Pb and 0.12% Sn) over 73.65m including a higher-grade section of 204.03 g Ag eq/t (27.54 g Ag/t, 0.40% Zn, 0.55% Pb and 0.21% Sn) over 28.57m.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from six (6) additional diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Hole METSBUG-02 is an underground hole drilled northeast from the Santa Barbara adit for metallurgical purposes and to complete fill-in drilling. The remaining five (5) holes tested the NW extension in the Santa Barbara Mineral Resource Target Area (DSB-12, -13, -15, -20 and -21) on a series of NE-SW sections as shown in Figure 1. read more

Eloro Resources Intersects 239.72 g Ag eq/t (39.58 g Ag/t, 1.04% Pb, 0.26% Cu and 0.20% Sn) over 82.74m in Southern Part of Santa Barbara Target at Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Includes a higher-grade section of 318.15 g Ag eq/t (53.58 g Ag/t, 1.43 % Pb, 0.32 %Cu and 0.27 %Sn) over 51.09m in underground drill hole DSBU-01. 134.47 g Ag eq/t (10.79 g Ag/t, and 0.15 %Sn) over 115.44m including a higher-grade section of 160.87 g Ag eq/t (9.65 g Ag/t, 0.21% Cu, and 0.17 %Sn) over 37.55m in underground hole DSBU-02. Promising results from these holes across a well mineralized width of 200+m opens significant possibilities in the southern extension of the Santa Barbara target area where additional drilling is now planned.
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce further assay results from seven (7) additional diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Two (2) of these holes (DSBU-01 and DSBU-02) are underground holes drilled from the Santa Barbara adit. Three (3) of the holes tested the Central Breccia Pipe (“CBP”) target (DCN-06 and DCN-07 from the Central North radial drilling platform and DCS-04 from the south platform). The final two (2) holes reported in this release tested the Porco Breccia Pipe (“PBP”) target. read more

Eloro Intersects 100 Ag eq/t (including 38.71 g Ag/t, 0.88%Zn and 0.51%Pb) over 188.5 m in the Santa Barbara Breccia Pipe at Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Section includes a higher-grade zone of 154 g Ag eq/t (including 75.51 g Ag/t, 0.96% Zn, 0.65% Pb and 0.16% Cu) over 65.8m
MotherlodeTV
ELO.V, Eloro, 321gold.com, Bob Moriarty, Bolivia, Iska Iska property,

Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to provide an update on its Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. To date, the Company has completed 34,409 metres (m) in 64 drill holes including three (3) in progress to test major target areas at Iska Iska. This press release reports drilling results from one (1) additional hole which tested the Santa Barbara Breccia Pipe (“SBBP”) (Hole DHK-23) and two holes (DCN-05 and DCS-03) which tested the Central Breccia Pipe target (“CBP”). To date, every drill hole that has been assayed has returned multiple reportable mineralized intercepts. Currently three drill rigs are in operation at Iska Iska. Two surface drill rigs are continuing to drill at SBBP to outline an initial National Instrument 43-101 (“NI-43-101”) compliant resource. A third drill, an underground rig, situated in the west end of the Santa Barbara Adit, is testing the eastern part of SBBP and its mineralized envelope. Figure 1 is a geological plan map showing locations of drill holes and an updated geological interpretation. Table 1 provides significant drilling results with definitions of chemical symbols and Table 2 lists holes completed with assays pending, as well as holes in progress in the three major target areas. Highlights are as follows: read more