Aben Resources Ltd. (TSX-V: ABN) (OTCQB: ABNAF) (Frankfurt: E2L2) (the “Company”) is pleased to report that assay results from the first drill hole of 2018 have been received with multiple high-grade zones and precious metal values intersected in the hole at shallow depths. Drill hole FK18-10 was collared in the North Boundary Zone of the Forrest Kerr Property in BC’s Golden Triangle region where drilling late in the season in 2017 discovered strong precious and base metal mineralization. Hole FK18-10, the first of eight holes that have been drilled thus far, has four separate high-grade zones with the best zone returning and interval of 38.7 g/t Au over 10.0m including 62.4 g/t Au over 6.0m starting at 114 metres downhole.
Golden Triangle, B.C., claims map: https://www.abenresources.com/site/assets/files/4728/abn_golden_triangle_map_1.1024×0.jpg
- Four separate high-grade zones intersected in first drill hole FK18-10 all within 190 metres downhole at recently discovered North Boundary Zone
- Highest-grade zone consists of 331.0 g/t (grams/tonne) gold (Au) (9.65 oz/t) over 1.0 metre (m) within broad zone averaging 38.7 g/t Au (1.12 oz/t) over 10.0m from 114.0-124.0m including 62.4 g/t Au over 6.0m (true thicknesses undetermined)
- Additional high-grade zones in Hole FK18-10 include 22.0 g/t Au, 22.4 g/t silver (Ag) over 4.0m; 3.9 g/t Au, 4.0 g/t Ag over 13.0m; and 8.2 g/t Au, 1.4 g/t Ag over 6.0m (see table below for intervals in more detail)
- This new discovery is part of the Boundary North Zone and is 230m north of the historic high-grade drill hole drilled by Noranda in 1991
- Plans to expand the drill program are being put in place and assays are pending for seven more drill holes
Jim Pettit, President and CEO of Aben Resources stated, “The high-grade gold and base metal values in the first hole of the 2018 drill program have far exceeded our expectations and confirm the presence of a robust and strong mineralizing system at the recently discovered North Boundary Zone. We are now looking at an area that extends 230m south to the historic high-grade Noranda drill hole from 1991 and although the geology is complex we believe more drilling will delineate additional high-grade mineralization. The target areas in and around the Boundary Zone are relatively shallow and continue to provide strong discovery potential as we look to value-add the project using a systematic exploration methodology. With drilling ongoing, the Company is awaiting assay results from an additional seven drill holes, all of which were drilled at the North Boundary Zone and will provide updates as results become available. I would like to congratulate our geological team on their work thus far as we have made a significant discovery in the Golden Triangle region that is still in its early days with drilling slated to ramp up over the coming months.”
Ron Netolitzky, Chairman of Aben Resources, stated: “The presence of multiple mineralized zones associated with mesothermal veining and adjacent to major structural breaks is very encouraging. Close proximity to infrastructure will facilitate ongoing exploration.”
Overview of Drill Hole FK18-10 and Geological Description:
Hole FK18-10 (140/-45) was drilled from a location 35 metres northwest and along section from the drill pad from which the discovery holes FK17-04, 05 and 06 were drilled late in the drill season last year in August/September. The new hole has further defined and significantly increased the zone of precious and base metal mineralization that the 2017 holes originally intersected. Of particular note, the high-grade interval of 331.0 g/t Au was encountered 230 metres north of a 326 g/t Au interval reported by Noranda in 1991 in drill hole RG91-16 (see attached plan map). High-grade intercepts are generally found in narrow and discrete zones of moderate mineralization within a broad envelope of lower grade mineralization. Mineralization at North Boundary reflects the poly-metallic nature of the core with widely variable values of Au, Ag, Cu, Pb and Zn throughout.
Boundary North Plan View map:
With drilling currently ongoing, final geochemical assays results for seven completed holes are still pending and the Company will look to expand the scope of the program given the results from the first hole and visual indicators in the other holes. This recently discovered North Boundary Zone shows very little outcrop exposure and contains complex geology which is disrupted by a series of faults of unknown orientation. Additional drilling is required to determine true thicknesses and establish controls to the mineralization
Previously reported and select results from the few 2017 drill holes at North Boundary include 6.7 g/t Au, 6.4 g/t Ag and 0.9% Cu over 10.0m including 18.9 g/t Au, 16.6 g/t Ag and 2.2% Cu over 3.0m in hole FK17-04 which contributed to an average grade of 0.26 g/t Au over 387.0m. Hole FK17-05 returned 21.5 g/t Au, 28.5 g/t Ag and 3.1% Cu over 6.0m from the same zone at a slightly greater depth.
Boundary North Cross Section map:
Mineralization at North Boundary is structurally controlled and hosted in a package of volcanic and volcaniclastic rocks from the Jurassic Hazelton Group. Several generations of quartz and quartz-carbonate veining are important hosts to mineralization, as are subordinate breccia zones with strong chlorite, hematite and carbonate alteration. The Boundary Zone lies between the Forrest Kerr Fault to the west, a major deep-seated crustal feature, and the unconformable contact between the Jurassic Hazelton Group and the Triassic Stuhini Group to the East. The rock reflects a prolonged history of strong hydrothermal activity combined with brittle deformation. The host package Hazelton is known to be a prolific host to several deposits throughout the region.
Table 1: Geochemical Assay Results from Hole FK18-10:
|Hole ID||From (m)||To (m)||Interval (m)||Au (g/t)||Ag (g/t)||Cu (ppm)|
|* all assay values are uncut and intervals reflect drilled intercepts|
|true thicknesses and orientations of the various zones is currently not known|
Analytical and QA/QC Description:
All 1 or 2 metre drill core samples were delivered to ALS Global prep facility in Terrace, British Columbia where they were crushed until 70% passed a 2mm sieve, then a 250g split was pulverized until better than 85% passed a 75 micron screen. Gold was tested via fire assay method Au-ICP21 with all ore-grade samples (>10 g/t) undergoing fire assay with gravimetric finish. ALS performed multi-element ICP-AES package ME-ICP41 in their Vancouver facility to test for 35 other elements. In addition to the quality assurance and quality control program performed by ALS, Aben personnel insert lab certified standards, field blanks and duplicates into the sample stream at the rate of one QA/QC sample in every 10 samples.
Cornell McDowell, P.Geo., V.P. of Exploration of Aben Resources, has reviewed and approved the technical aspects of this news release and is the Qualified Person as defined by National Instrument 43-101.
About Aben Resources:
Aben Resources is a Canadian gold exploration company advancing projects in British Columbia’s Golden Triangle, the Yukon and Saskatchewan. The Company is actively exploring its flagship and high-grade Forrest Kerr Project located in the Golden Triangle region where recent drilling has discovered strong precious and base metal mineralization at the North Boundary Zone.
For further information on Aben Resources Ltd. (TSX-V: ABN), visit our Company’s web site at www.abenresources.com.
Aben Resources has approx. 81.5 million shares issued and outstanding.
ABEN RESOURCES LTD.
JAMES G. PETTIT
President & CEO
For further information contact myself or:
Aben Resources Ltd.
Director, Corporate Communications
Toll Free: 800-567-8181
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This release includes certain statements that may be deemed to be “forward-looking statements”. All statements in this release, other than statements of historical facts, that address events or developments that management of the Company expects, are forward-looking statements. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, and actual results or developments may differ materially from those in the forward-looking statements. The Company undertakes no obligation to update these forward-looking statements if management’s beliefs, estimates or opinions, or other factors, should change. Factors that could cause actual results to differ materially from those in forward-looking statements, include market prices, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions. Please see the public filings of the Company at www.sedar.com for further information.